Bay windows add character and area to a home 28032

Bay Windows Add Character And Space To A Home

It was the perfect area. Our California cattle ranch style house had a big picture window in the front space. The window extended from a couple of inches above the flooring to just a few inches below the cathedral ceiling. The walls and ceiling were redwood stained knotty pine and the floor was a coordinating hardwood. The window looked out over a flower bed, shrubs and the stretch of front yard. It was the perfect window to be changed with a bay window.

The window was nearly square. It was 72 X 72 inches. We thought about a bow window, however elected to install a bay window rather. We just felt that our specific home looked better with 3 panel bay window instead of the numerous panel bow windows. Our intent was to fill the seat board of the bay with potted plants we had being in front of the present picture window. The new plan would offer us a little more area in the space and enhance the overall look of your house. It was time to go shopping.

Scratch vs. Pre-built

When we initially got the idea of installing the new window, I began collecting plans for building a bay window. Thumbing through books and magazines, and the Web online search engine, I found several prepare for constructing a bay window from scratch. I likewise found that undertaking such a project was going to be unnecessary. Most of the major window producers, such as Pella, Milgard and Anderson make both completely pre-assembled bay windows along with pre-built components for bay windows.

These days really few specialists will take on the project of constructing a bay or bow window from scratch. It just isn't useful when for the same or less cash they can install a high quality pre-built window. If the specialists use pre-built windows or elements for new house building and construction or restoration jobs, then we could do the very same for our redesigning job, we reasoned.

Installing a bay window can easily be a do-it-yourselfer project. Before you go the diy route, nevertheless, you might wish to line up a professional to assist if needed. This is not going to be a job that you can finish throughout a Saturday afternoon. Chances are you are not going to finish it in a weekend, for that matter.

You are also going to want to line up some aid. Bay windows and window components are heavy. At least they are too heavy for one person to manage.

Be sure and take a look at the weather forecast, consisting of the long variety forecast. Setting up the window suggests opening a hole into your home. It can take a number of days to get the new window in place and sealed. The last thing you want is for rain to come gathering on your floor, walls or furniture.

Be sure and check your city or neighborhood building and construction codes. There might be unique regional requirements, such as having safety glass in low profile windows. You are most likely going to need a building license anyway, so that is also a great time to inspect the codes.

Tools and Products Needed

The tools you will need for this task consist of a tape measure, a framing square that you can likewise use as a straight edge, a circular saw or miter saw, crow bars, drill and bits, level, stapler, energy knife, tin snips and a caulking weapon.

The products you will need include the bay window system, the assistance brackets, nails, roofing paper, shingles, roofing nails, exterior grade silicone caulking and fiberglass insulation. You will also need 1X6 inch boards for the window skirting. If you are increasing the size of an existing Somerville plumbing solutions window, or if you are setting up the window in a space that was previously the wall, you will likewise require 2X4s for cripple studs and additional framing.

Basic Installation Steps

1. Establish window position in the wall. Remove the existing window. Measuring the bay window, mark on the outside of the house the opening needed for the brand-new local plumber Dandenong window. Using your circular saw, cut the needed opening.

2. Framing. Construct the framing for the new window. This will likely consist of cutting through existing studs and putting in a brand-new header, rough sill, jack studs and paralyze studs.

3. Set up the support braces. A window up to 5 feet broad will take a minimum of 2 support braces. A wider window will require three.

4. Set the window in location. Raise the bay window on the support braces and move it into the rough opening. Shim as essential to level the window. Anchor in place.

5. Develop the window roofing. Set the roofing system frame on top of the bay window unit and nail in place. Fill the space in between the roof and the top of the bay window with insulation. Secure the roofing system sheeting to the frame and cover with roofing paper. Install the drip edges and the flashing and then shingle.

6. Set up the window skirting around the bottom of the window. Fill will insulation and then connect the skirt bottom to seal the underneath side of the window.

7. Seal the edges with silicone caulking.

This is a list of the basic installation steps and they have been abbreviated in the interests of simplicity and space. The window unit you buy will have complete setup steps. Take it from the voice of experience; it actually makes the project go far more smoothly and it will be completed in much less time when you check out and follow them.

In our case, I had two buddies aiding with the project. We have worked together on other projects and work together well. We had the old window out and the rough framing finished on Saturday afternoon. We buttoned up the hole with plywood over night and returned to work the next day. By Sunday evening we had the brand-new window set up and the roofing Hastings plumbing repairs and skirting finished. On Monday afternoon I ended up sealing up the outside and completed the trim work for the within.

And, we were right. It was the ideal spot for a bay window. It looked great from the exterior. Inside, it became the focal point of the space and included an unique appeal to your home. The window offered the house added character and value.

When it came time to offer the house, it was one of the functions that were particularly attractive to the purchasers.