Installing a brand-new shower unit 54002

Installing a New Shower Unit

An effective shower installation needs careful planning and a lot of work. For the most part, you will need to do three kinds of tasks: framing walls, setting up the pipes, and completing walls.

Preparation

Firstly, you should pick the kind of shower that you want to install. It is important to determine whether the picked shower is capable of coping with specific systems and can control a safe level of water through the boiler. Many shower systems nowadays are created to be versatile to different water pressures (such as kept warm water and cold mains).

It is likewise crucial to consider the water pressure and the preparation of the piping and drainage for the shower

Different Types of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be linked to the bath tap as per your requirement, and the water temperature level can be changed through the taps. Push-on mixers are cheap and extremely emergency plumbing service basic to install. Nevertheless, although the pipe connection is easy, it is easily dislodged. Furthermore, it is troublesome to change the temperature level.

Bath/ Shower Mixer: The hose and spray of this type of shower are combined with a bath mixer tap, and the temperature can be changed through the bath taps. It is a really cheap option and no additional pipes is included. However, the bath/shower mixers also experience inconvenient temperature control choices.

Manual Mixer: The tube and spray of a manual mixer shower system belong of the wall unit and the cold and hot water products are connected to a single valve The temperature and pressure of the water are controlled through either one or a variety of knobs (in more expensive showers). Although temperature level control is a lot easier in manual mixer types, they are more expensive than the previously discussed mixers. They also require extra plumbing of hot and cold water supply pipes.

Thermostatic Mixer: The pipe and spray of this shower type belong of the wall system and the hot and cold water supplies are linked top-rated plumbing company to a single valve here too. It is complete with an integrated stabiliser to self-adjust the water temperature level and to avoid it from ending up being too hot. One of the most significant advantages of a thermostatic mixer shower type includes hassle-free temperature control. Nevertheless, it is the most expensive of the different mixer options.

Power Shower: A power shower is a single unit consisting of an effective electrical pump that can altering both the water pressure and temperature level. This type of shower can be fitted if there is water system from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both pressure and temperature easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is supplied by a combination boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats the water electrically. It is important to keep in mind professional plumbing service that for this shower type to be set up, the mains pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature level and pressure to be adjusted via a knob. Designs with temperature stabilisers are much better as they stay unaffected by other taps somewhere else in usage within the family. A major downside of electric showers is that the control knob only enables the choice of heats at less pressure, or lower temperatures at a greater pressure. This is bothersome in the winter season when the spray is frequently weak and the mains water is cooler. Nevertheless, this problem is taken on in some designs which are available with a winter/summer setting.

Method

Depending on the type of shower you want to set up, the shower head should either be suited order to prevent its contact with the water in the bath below or the base tray, or it should have a check valve.

Before starting, it is a good idea to mark the positions of the shower head and control, and to plan the pipe-work involved. In addition, the drain system to get rid of the waste water will need to be planned. Both positions of the cable television path and the shower switch will also need to be considered if a rapid or electrical shower system is being installed.

Use the instruction guide offered with the shower unit to fit the shower control.

Before fitting the pipes that will provide the water to the shower system, it is essential to cut off the water supply. In order to protect the pipelines, they ought to be given a waterproof covering and also fitted with isolating valves. The pipelines can then be buried into the wall and plastered over to neaten the overall look.

Fit the base tray, shower head, and fittings.

Connect the main shower control to the pipelines that will be supplying the water (This might require a female screw thread adapter).

Reconnect the water system and test the pipelines for any leakages, as some may need tightening.

If you are setting up an electrical shower, remember to turn off the electrical energy supply before making any electrical connections. Once these connections have actually been made (there should be guidance within the instruction manual), the power supply can be switched back on.

Adjusting Water Pressure to Suit Your Shower

The cold water reservoir can be raised to a higher height (sometimes as low as 150mm (6inches)) by fitting a strong wooden assistance underneath it-- perhaps made up of struts and blockboards. If you choose this choice, the main and circulation pipelines will also have to be raised to satisfy the new height of the reservoir.

Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be linked into the power supply in order to operate.

Piping and Drainage

It is best to utilize 15mm size supply pipes, and make the runs to the shower as short and straight as possible so regarding keep optimal pressure and reduce heat loss. In addition, by reducing making use of elbows for licensed plumber near me pipeline corners, you can decrease the resistance in the circulation of the supply of water. You can attain this by flexing the pipes instead.

Most Common Mistakes

# Breaching or overlooking local code restrictions.

# Using pipelines that are too small.

# Attaching copper to galvanized recommended best plumbing company without utilizing a brass or dielectric fitting in between the two.

# Not using tape or pipe substance at threaded joints.

# Not leveling your fixtures when installing them.

# Not installing an air gap filling for fixtures.

# Cutting supply stub outs too brief to set up the shutoff valves onto after the completed wall is in place.

# Not properly lining up tubing into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leak.)

# When turning the water back on in your home, constantly run the outdoors tube valve or flush your toilets to bleed dirt and air from the lines. This particles can cause issues in your sink faucets and other plumbing trim.