Bay windows include character and area to a home 63172

Bay Windows Add Character And Space To A Home

It was the ideal spot. Our California cattle ranch style home had a big picture window in the front room. The window extended from a couple of inches above the floor to only a few inches listed below the cathedral ceiling. The walls and ceiling were redwood stained knotty pine and the flooring was a matching hardwood. The window kept an eye out over a flower bed, shrubs and the expanse of front lawn. It was the best window to be replaced with a bay window.

The window was almost square. It was 72 X 72 inches. We considered a bow window, however elected to install a bay window rather. We just felt that our specific house looked better with three panel bay window instead of the numerous panel bow windows. Our intent was to fill the seat board of the bay with potted plants we had sitting in front of the present photo window. The new plan would offer us a little more area in the room and improve the total look of your home. It was time to go shopping.

Scratch vs. Pre-built

When we first got the idea of setting up the new window, I started gathering plans for developing a bay window. Thumbing through books and publications, and the Web online search engine, I discovered a number of plans for developing a bay window from scratch. I likewise discovered that carrying out such a project was going to be unneeded. The majority of the major window manufacturers, such as Pella, Milgard and Anderson make both entirely pre-assembled bay windows in addition to pre-built parts for bay windows.

These days extremely couple of contractors will take on the job of building a bay or bow window from scratch. It just isn't useful when for the exact same or less money they can install a high quality pre-built window. If the contractors utilize pre-built windows or elements for brand-new house building or restoration jobs, then we could do the exact same for our remodeling task, we reasoned.

Installing a bay window can quickly be a do-it-yourselfer project. Before you go the do it yourself path, however, you might want to line up a professional to help out if essential. This is not going to be a task that you can complete during a Saturday afternoon. Opportunities are you are not going to finish it in a weekend, for that matter.

You are likewise going to wish to line up some aid. Bay windows and window elements are heavy. A minimum of they are too heavy for a single person to manage.

Be sure and check out the weather report, consisting of the long variety forecast. Setting up the window means opening a hole into your home. It can take a couple of days to get the brand-new window in location and sealed. The last thing you want is for rain to come pouring in on your flooring, walls or furniture.

Be recommended best plumbing company sure and check your city or community construction codes. There may be special local requirements, such as having safety glass in low profile windows. You are most likely going to need a structure authorization anyway, so that is also a great time to examine the codes.

Tools and Materials Needed

The tools you will need for this job include a measuring tape, a framing square that you can also utilize as a straight edge, a circular saw or miter saw, crow bars, drill and bits, level, stapler, energy knife, tin snips and a caulking weapon.

The products you will need consist of the bay window unit, the assistance brackets, nails, roof paper, shingles, roofing nails, outside grade silicone caulking and fiberglass insulation. You will also require 1X6 inch boards for the window skirting. If you are enlarging an existing window, or if you are setting up the window in an area that was previously the wall, you will also need 2X4s for cripple studs and extra framing.

Basic Installation Steps

1. Establish window position in the wall. Get rid of the existing window. Measuring the bay window, mark on the outside of the house the opening required for the brand-new window. Using your circular saw, cut the required opening.

2. Framing. Construct the framing for the new window. This will likely include cutting through existing studs and putting in a brand-new header, rough sill, jack studs and maim studs.

3. Install the assistance braces. A window up to 5 feet broad will take a minimum of two support braces. A larger window will need three.

4. Set the window in place. Lift the bay window on the support braces and move it into the rough opening. Shim as necessary to level the window. Anchor in place.

5. Construct the window roof. Set the roofing frame on top of the bay window system and nail in location. Fill the area in between the roofing system and the top of the bay window with insulation. Secure the roofing sheeting to the frame and cover with roof paper. Set up the drip edges and the flashing and then shingle.

6. Install the window skirting around the bottom of the window. Fill will insulation and then attach the skirt bottom to seal the below side of the window.

7. Seal the edges with silicone caulking.

This is a list of the standard setup actions and they have actually been abbreviated in the interests of simpleness and space. The window unit you buy will have complete setup actions. Take it from the voice of experience; it truly makes the job go much more smoothly and it will be finished in much less time when you check out and follow them.

In our case, I had 2 friends helping with the project. We have collaborated on other tasks and interact well. We had the old window out and the rough framing finished on Saturday afternoon. We buttoned up the hole with plywood over night and went back to work the next day. By Sunday evening we had the brand-new window installed and the roofing system and skirting completed. On Monday afternoon I ended up sealing up the outside and completed the trim work for the within.

And, we were right. It was the best spot for a bay window. It looked terrific from the exterior. Inside, it ended up being the centerpiece of the room and included a special charm to your house. The window gave the house included character and value.

When it came time to sell your house, it was among the features that were particularly appealing to the buyers.